Removal

HEATING / AIR CONDITIONING: SOLAR SENSOR: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Radio and Display Type with Intuitive Parking Assist System)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Navigation Receiver Type)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR CONSOLE BOX ASSEMBLY

Removal

5. REMOVE BOX BOTTOM MAT Removal

6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio Receiver Type) Removal

10. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type) Removal

11. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type) Removal

12. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY Removal

13. REMOVE SOLAR SENSOR

(a) Disengage the 2 claws and remove the solar sensor.