Removal

2AR-FE STARTING: ENGINE SWITCH: REMOVAL

1. PRECAUTION

NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Removal.

4. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Removal.

5. REMOVE FRONT DOOR SCUFF PLATE LH Removal

6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

7. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal

8. REMOVE INSTRUMENT SIDE PANEL LH Removal

9. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

10. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

11. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

12. REMOVE FRONT PANEL GARNISH LH Removal

13. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

14. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

15. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal

16. REMOVE ENGINE SWITCH

(a) Disengage the 2 claws and remove the engine switch.