Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION

1. INSTALL EXTENSION MODULE

(a) Connect the connector to install the extension module.

(b) Connect each connector to install the navigation wire.

2. INSTALL NO. 1 RADIO RECEIVER BRACKET Installation

3. INSTALL NO. 2 RADIO RECEIVER BRACKET

HINT
Use the same procedure as for the No. 1 radio receiver bracket.

4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

7. INSTALL INTEGRATION CONTROL AND PANEL Installation

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL DECK FLOOR BOX RH Installation

10. INSTALL REAR DECK FLOOR BOX Installation

11. INSTALL NO. 1 DECK BOARD Installation

12. INSTALL NO. 2 DECK BOARD Installation

13. INSTALL DECK BOARD ASSEMBLY Installation