Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2006 >> Rabbit (1K1) L5-2.5L (BGP) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Control Module: Service and Repair






HID Headlamp Control Module

• Left High-intensity Gas Discharge Lamp Control Module (J343) and Right High-intensity Gas Discharge Lamp Control Module (J344) is not capable of On Board Diagnostic (OBD).

Removing

- Remove headlamp. Refer to=> [ Headlamps ] Headlamps.

- Remove mounting bolts - arrows - of High-intensity Gas Discharge Lamp Control Module - 1 -.





• While removing High-intensity Gas Discharge Lamp Control Module , no harness connectors must be disconnected. Harness connector is installed permanently on headlamp and is automatically disconnected when removing High-intensity Gas Discharge Lamp Control Module.

- Remove High-intensity Gas Discharge Lamp Control Module - 1 - from headlamp.

Installing

CAUTION!
Make sure seal has proper seating when installing High-intensity Gas Discharge Lamp Control Module. It is destroyed by ingress of water into headlamp.

Install in reverse order of removal, noting the following:

- Check headlamp for function.

- Perform basic setting of headlamp
pro multis · About Operation CHARM