Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2006 >> Rabbit (1K1) L5-2.5L (BGP) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module without Anti-Theft Protection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module without Anti-Theft Protection






Engine Control Module without Anti-Theft Protection

• If it is desired to replace Engine Control Module (ECM), connect Vehicle Diagnosis, Testing and Information System (VAS 5051 ) and perform the guided function "Replace control module ".

Removing

- Switch off ignition.

- Remove wiper arms and plenum chamber cover

- Remove plenum chamber bulkhead

- Disengage forward harness connector - 1 - from Engine Control Module (ECM) and disconnect it.





- Pry up locking mechanism - 2 - slightly.

- Then slide Engine Control Module (ECM) out of retainer - arrow -.

- Now disengage rear harness connector from Engine Control Module (ECM) and disconnect it.

Installing

- Connect rear harness connector to Engine Control Module (ECM) and engage it.

- Slide Engine Control Module (ECM) on to retaining plate.

- Now connect front harness connector to Engine Control Module (ECM) and engage it.

- Install plenum chamber bulkhead

- Install wiper arms and plenum chamber cover
pro multis · About Operation CHARM