Crankshaft, Engine

Crankshaft Main Bearing Cap Bolts 40 Nm plus an additional 90° (1/4 turn)
Replace

Crankshaft
Axial play
New 0.07 to 0.21 mm
Wear limit 0,30 mm
Radial clearance
New 0.023 to 0.043 mm
Wear limit 0.07 mm

Identification of top crankshaft bearing shells





From the factory, the upper bearing shells are allocated to the cylinder block with the correct thickness. Colored spots serve to identify the bearing thicknesses.

The letters marked on the lower sealing surface of the cylinder block identify which bearing thickness must be installed in which location.

G - Yellow
B - Blue
W - White

Note:
^ - Arrow - points in direction of travel.
^ If color markings can no longer be read, use the blue bearing shell.
^ The lower crankshaft bearing shells are always shipped as replacement part with "yellow" color marking.


Crankshaft Dimensions

(Dimensions in mm)