Engine Mount
Assembly mount
Engine mount
1. = 40 Nm plus an additional 90 (1/4 turn)
2. = 20 Nm plus an additional 90 (1/4 turn)
3. = 60 Nm plus an additional 90 (1/4 turn)
^ Replace
Transmission mount
A - = 40 Nm plus an additional 90° 90° (1/4 turn) ^ See note
B - = 60 Nm plus an additional 90° 90° (1/4 turn) ^ See note
^ Replace
Pendulum supports
Note:
^ First install pendulum support at transmission and then at subframe.
A - = 40 Nm plus an additional 90° (1/4 turn) ^ See note
B - = 100 Nm plus an additional 90° (1/4 turn) ^ See note
^ Replace