Removal

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE CONSOLE BOX ASSEMBLY

Removal

9. REMOVE INTEGRATION CONTROL AND PANEL Removal

10. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal

11. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

12. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET Removal

13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

14. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

15. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY

(a) Disconnect the 2 connectors.

(b) Remove the 2 bolts.

16. REMOVE NO. 3 DCM (TELEMATICS TRANSCEIVER) BRACKET Removal

17. REMOVE BACK-UP BATTERY

18. REMOVE NO. 2 DCM (TELEMATICS TRANSCEIVER) BRACKET

(a) Remove the 3 screws and No. 2 DCM (telematics transceiver) bracket.

19. REMOVE NO. 1 DCM (TELEMATICS TRANSCEIVER) BRACKET

(a) Remove the screw and No. 1 DCM (telematics transceiver) bracket.

20. REMOVE DCM (TELEMATICS TRANSCEIVER)