Sun Visor: Service and Repair

Sun Visor:

SUN VISOR REMOVAL
1. Remove screw holding inboard visor pivot to windshield header.
2. Remove screws holding outboard visor pivot base to windshield header.
3. Separate visor from header.
4. Disconnect visor vanity lamp wire connector, if equipped.

INSTALLATION
1. Engage visor vanity lamp wire connector, if equipped.
2. Place visor in position on header.
3. Install screws to hold outboard visor pivot base to windshield header.
4. Install screw to hold inboard visor pivot to windshield header.