DTC B1101[76] Stereo Camera Azimuth Malfunction (Stereo Camera)

1. Stereo camera system check

Refer to "75.Driver Assistance System 10W.Troubleshooting(Stereo Camera) diagnostic system check-stereo camera".

2. Stereo camera installation position check

1) Check the stereo camera installation position.

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera installation".

2) If the stereo camera installation position is improper, adjust the installation position.

Procedure completion

=>Go to Current DTC check.

3. Current DTC check

1) Connect the scan tool.

2) Turn ON the ignition switch.

3) Observe the DTC information with a scan tool. Is a DTC set?

Yes

=>Go to Stereo camera replacement.

No

=>Go to Repair verification.

4. Stereo camera replacement

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera removal".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera installation".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera setting".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera writing".

Procedure completion

=>Go to Repair verification.

5. Repair verification

1) Clear the DTC with a scan tool.

2) Turn OFF the ignition switch for 30 seconds or more.

3) Turn ON the ignition switch.

4) Observe the DTC information with a scan tool.