DTC B1101[98] Stereo Camera Internal Temperature Malfunction (Stereo Camera)

1. Stereo camera system check

Refer to "75.Driver Assistance System 10W.Troubleshooting(Stereo Camera) diagnostic system check-stereo camera".

2. Current DTC check

1) Connect the scan tool.

2) Turn ON the ignition switch.

3) Observe the DTC information with a scan tool. Is a DTC set?

Yes

=>Go to Stereo camera replacement.

No

Go to Intermittent conditions of stereo camera.

Refer to "233.Driver Assistance System 46D.Symptom(Stereo Camera) intermittent conditions of stereo camera".

3. Stereo camera replacement

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera removal".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera installation".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera setting".

Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera writing".

Procedure completion

=>Go to Repair verification.

4. Repair verification

1) Clear the DTC with a scan tool.

2) Turn OFF the ignition switch for 30 seconds or more.

3) Turn ON the ignition switch.

4) Observe the DTC information with a scan tool.