LIFTGATE OPENER SWITCH INSPECTION
id091400516200
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
-
- (2) Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)
-
- (3) Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION.)
-
- (4) Power liftgate (PLG) rear switch (with power liftgate) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION.)
-
- (5) Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)
-
- (6) Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION.)
-
- (7) Rear finisher (See REAR FINISHER REMOVAL/INSTALLATION.)
-
- (8) Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION.)
-
3. Verify the continuity of liftgate opener switch terminals A and B.
-
