NO.5 DSC*2 OPERATES FREQUENTLY/DSC DOES NOT WORK CORRECTLY *2: DSC INDICATOR LIGHT GOES ON AND OFF WHILE DSC OPERATES [DYNAMIC STABILITY CONTROL (DSC)]

5	DSC^2 operates frequently/DSC does not work correctly^2: DSC indicator light goes on and off while DSC operates
Possible cause	• DSC HU/CM DTC is stored • Poor installation with combined sensor (with combined sensor)/SAS control module (without combined sensor) and/or steering angle sensor ― If any of the above sensors are poorly installed, DSC may operate intermittently • Initialization is not performed after replacing DSC HU/CM or steering angle sensor ― If initialization is not performed correctly, DSC may not work correctly

• Vehicles with combined sensor: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ BL12F60# 100001—181415

• JMZ BL12F70# 100001—181415

• JMZ BL12Y20# 100001—181415

• JMZ BL12Z20# 100001—181415

• JMZ BL12Z50# 100001—181415

• JMZ BL14F60# 100001—181415

• JMZ BL14F70# 100001—181415

• JMZ BL14Y20# 100001—181415

• JMZ BL14Z20# 100001—181415

• JMZ BL14Z50# 100001—181415

• JMZ BLA2A60# 100001—181415

• JMZ BLA2C60# 100001—181415

• JMZ BLA2F70# 100001—181415

• JMZ BLA2G60# 100001—181415

• JMZ BLA2Y60# 100001—181415

• JMZ BLA2Z20# 100001—181415

• JMZ BLA2Z50# 100001—181415

• JMZ BLA4360# 100001—181415

• JMZ BLA4A60# 100001—181415

• JMZ BLA4C60# 100001—181415

• JMZ BLA4F70# 100001—181415

• JMZ BLA4G60# 100001—181415

• JMZ BLA4Y60# 100001—181415

• JMZ BLA4Z20# 100001—181415

• JMZ BLA4Z50# 100001—181415

Australian specs.

• JM0 BL103100 100001—225632

• JM0 BL10C100 100001—225632

• JM0 BL10F100 100001—225632

• JM0 BL10L100 100001—225632

General (R.H.D.) specs.

• JM6 BL1031*0 100001—225632

• JM6 BL1051*0 100001—225632

• JM6 BL10F1*0 100001—225632

• JM6 BL10L1*0 100001—225632

• JM6 BL10Z1*0 100001—225632

General (L.H.D.) specs., Arab Gulf Cooperation Council, China

• JM7 BL04F**# 100001—225632

• JM7 BL04Z**# 100001—225632

• JM7 BL12F**# 100001—225632

• JM7 BL12Z**# 100001—225632

• JM7 BL14F**# 100001—225632

• JM7 BL14Z**# 100001—225632

• JM7 BL22F**# 100001—225632

• JM7 BL22Z**# 100001—225632

• JM7 BL24F**# 100001—225632

• JM7 BL24Z**# 100001—225632

• Vehicles without combined sensor: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ BL12F60# 181416—

• JMZ BL12F70# 181416—

• JMZ BL12Y20# 181416—

• JMZ BL12Z20# 181416—

• JMZ BL12Z50# 181416—

• JMZ BL14F60# 181416—

• JMZ BL14F70# 181416—

• JMZ BL14Y20# 181416—

• JMZ BL14Z20# 181416—

• JMZ BL14Z50# 181416—

• JMZ BLA2A60# 181416—

• JMZ BLA2C60# 181416—

• JMZ BLA2F70# 181416—

• JMZ BLA2G60# 181416—

• JMZ BLA2Y60# 181416—

• JMZ BLA2Z20# 181416—

• JMZ BLA2Z50# 181416—

• JMZ BLA4360# 181416—

• JMZ BLA4A60# 181416—

• JMZ BLA4C60# 181416—

• JMZ BLA4F70# 181416—

• JMZ BLA4G60# 181416—

• JMZ BLA4Y60# 181416—

• JMZ BLA4Z20# 181416—

• JMZ BLA4Z50# 181416—

Australian specs.

• JM0 BL103100 225633—

• JM0 BL10C100 225633—

• JM0 BL10F100 225633—

• JM0 BL10L100 225633—

General (R.H.D.) specs.

• JM6 BL1031*0 225633—

• JM6 BL1051*0 225633—

• JM6 BL10F1*0 225633—

• JM6 BL10L1*0 225633—

• JM6 BL10Z1*0 225633—

General (L.H.D.) specs., Arab Gulf Cooperation Council, China

• JM7 BL04F**# 225633—

• JM7 BL04Z**# 225633—

• JM7 BL12F**# 225633—

• JM7 BL12Z**# 225633—

• JM7 BL14F**# 225633—

• JM7 BL14Z**# 225633—

• JM7 BL22F**# 225633—

• JM7 BL22Z**# 225633—

• JM7 BL24F**# 225633—

• JM7 BL24Z**# 225633—

STEP	INSPECTION		ACTION
1	CONFIRM DSC HU/CM DTC • Retrieve the DSC HU/CM DTC using the M-MDS. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
1		No	Go to the next step.
2	INSPECT INSTALLATION OF COMBINED SENSOR AND STEERING ANGLE SENSOR • Inspect the installation of combined sensor and steering angle sensor. • Are the sensors securely installed?	Yes	Go to the next step.
2		No	Install the malfunctioning sensor securely. (See COMBINED SENSOR REMOVAL/INSTALLATION.) (See STEERING ANGLE SENSOR REMOVAL/INSTALLATION.)
3	INSPECT INITIALIZATION OF COMBINED SENSOR AND STEERING ANGLE SENSOR • Did the sensors initialize after replacement of DSC HU/CM or steering angle sensor?	Yes	Found the malfunctioning part according to Intermittent Concern Troubleshooting. (See PRECAUTION [DYNAMIC STABILITY CONTROL (DSC)].)
3		No	Perform the initialization procedure. (See DSC SENSOR INITIALIZATION PROCEDURE.)

STEP	INSPECTION		ACTION
1	CONFIRM DSC HU/CM DTC • Retrieve the DSC HU/CM DTC using the M-MDS. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
1		No	Go to the next step.
2	INSPECT INSTALLATION OF SAS CONTROL MODULE AND STEERING ANGLE SENSOR • Inspect the installation of SAS control module and steering angle sensor. • Are the sensors securely installed?	Yes	Go to the next step.
2		No	Install the malfunctioning sensor securely. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.) (See STEERING ANGLE SENSOR REMOVAL/INSTALLATION.)
3	INSPECT INITIALIZATION OF SAS CONTROL MODULE AND STEERING ANGLE SENSOR • Did the sensors initialize after replacement of DSC HU/CM or steering angle sensor?	Yes	Found the malfunctioning part according to Intermittent Concern Troubleshooting. (See PRECAUTION [DYNAMIC STABILITY CONTROL (DSC)].)
3		No	Perform the initialization procedure. (See DSC SENSOR INITIALIZATION PROCEDURE.)