DTC U2005:86 [INSTRUMENT CLUSTER]
id0902e8509800
|
DESCRIPTION |
Erratic signal from PCM |
|---|---|
|
DETECTION CONDITION
|
• Instrument cluster receives the erratic vehicle speed data from PCM when the ignition is ON.
|
|
POSSIBLE CAUSE
|
• PCM DTC is stored
• PCM malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM PCM DTC
• Perform the DTC Reading Procedure to confirm the PCM DTC.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [LF, L5].)
(See DTC TABLE [MZR-CD 2.2].)
(See DTC TABLE [L3 Turbo].)
|
|
No
|
Go to the next step.
|
||
|
2
|
CONFIRM INSTRUMENT CLUSTER DTC
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Drive the vehicle at speed of 30 km/h {19 mph} or more.
• Perform the “DTC INSPECTION” to confirm the instrument cluster DTC.
• Is the same DTC present?
|
Yes
|
Replace the PCM, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Drive the vehicle at speed of 30 km/h {19 mph} or more.
• Perform the “DTC INSPECTION” to confirm the instrument cluster DTC.
• Is the same DTC present?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||