DTC U0483:92 [INSTRUMENT CLUSTER]
id0902e8989200
|
DESCRIPTION |
Error signal from auto leveling control module or AFS control module |
|---|---|
|
DETECTION CONDITION
|
• Instrument cluster receives the illumination command signal from auto leveling control module or AFS control module continues for 20 s or more.
|
|
POSSIBLE CAUSE
|
• Auto leveling control module or AFS control module DTC is stored.
• Auto leveling control module or AFS control module malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM AUTO LEVELING CONTROL MODULE OR AFS CONTROL MODULE DTC
• Perform the auto leveling control module or AFS control module DTC inspection using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM DTC INSPECTION AND VERIFY THAT MALFUNCTIONING PART IS AUTO LEVELING CONTROL MODULE OR AFS CONTROL MODULE
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Increase the engine speed more than 500 rpm.
• Perform the instrument cluster DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the auto leveling control module or AFS control module, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Increase the engine speed more than 500 rpm.
• Perform the instrument cluster DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||