DTC U3003:17 [REAR VEHICLE MONITORING SYSTEM]
id0902z2888700
|
DESCRIPTION |
Rear vehicle monitoring control module (RH) power supply circuit malfunction |
|---|---|
|
DETECTION CONDITION
|
• Rear vehicle monitoring control module (RH) power supply circuit voltage is above 16 V.
|
|
POSSIBLE CAUSE
|
• PCM DTC is stored.
• Battery malfunction
• Generator malfunction
• Rear vehicle monitoring control module (RH) malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM PCM DTC
• Perform the PCM DTC inspection using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [MZR 1.5, MZR 1.6].)
(See DTC TABLE [MZR 2.0, MZR 2.5].)
(See DTC TABLE [MZR-CD 2.2].)
(See DTC TABLE [MZ-CD 1.6].)
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT BATTERY
• Inspect the battery.
• Is there any malfunction?
|
Yes
|
Replace the battery, then go to Step 4.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT GENERATOR
• Inspect the generator.
• Is there any malfunction?
|
Yes
|
Replace the generator, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from rear vehicle monitoring control module using the M-MDS.
• Switch the ignition to ON and wait for 1.5 s or more.
• Perform the rear vehicle monitoring control module DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the rear vehicle monitoring control module (RH).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||