POWER WINDOW MOTOR REMOVAL/INSTALLATION

id091200803700

Front Power Window Motor

1. Fully lower the front door glass.

2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

3. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

4. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

5. Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.)

6. Remove the bolts.

am3uuw00005136

7. Disconnect the front power window motor connector.

am3uuw00002890

8. Install in the reverse order of removal.

Note

• When installing the front power window motor to the front power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the front door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the front power window motor to the drum.

Rear Power Window Motor

1. Fully lower the rear door glass.

3. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

4. Remove the rear door speaker. (See REAR DOOR SPEAKER REMOVAL/INSTALLATION.)

5. Remove the bolts.

am3uuw00005137

6. Disconnect the front power window motor connector.

am3uuw00002890

7. Install in the reverse order of removal.

Note

• When installing the rear power window motor to the rear power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the rear power window motor to the drum.