SIDE TURN LIGHT INSPECTION

id091800811600

Side Turn Light Illumination Inspection

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Remove the outer mirror glass. (See OUTER MIRROR GLASS REMOVAL.) (See OUTER MIRROR GLASS INSTALLATION.)

3.  Remove the outer mirror garnish. (See OUTER MIRROR GARNISH REMOVAL/INSTALLATION.)

4.  Remove the side turn light. (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

5.  Connect the battery voltage as shown in the figure.

am3zzw00007990

•  If the side turn light does illuminate, replace it.

•  If the side turn light illuminate, inspect the short-code.

Short-code Inspection

1.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

2.  Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the power outer mirror connector. (See POWER OUTER MIRROR REMOVAL/INSTALLATION.)

4.  Verify that the continuity between side turn light terminals is as indicated in the table.

am3uuw00006867

am3zzw00011643

•  If not as indicated in the table, replace the power outer mirror.