ANTENNA FEEDER NO.3 INSPECTION

id092000813000

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)(See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)(See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)(See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

2.  Remove the following parts:

(1)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(2)  Center lower panel (Vehicles without audio unit) (See CENTER LOWER PANEL REMOVAL/INSTALLATION.)

(3)  Audio unit (Vehicles with audio unit) (See AUDIO UNIT REMOVAL/INSTALLATION.)

(4)  A-pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect antenna feeder No.4.

am3zzw00005994

4.  Verify that the continuity between antenna feeder No.3 terminals is as indicated in the table.

am3zzw00006492

•  If not as indicated in the table, replace antenna feeder No.3.

am3zzw00006493