DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

id0802g7080700

Caution

•  When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

Note

•  The SRS air bag system can be identified by whether or not the seat track position sensor is present.

―  Standard deployment control system: Without seat track position sensor

―  Two-step deployment control system: With seat track position sensor

DTC				System malfunction location	Fail safe	Drive cycle	Self test type*1	Memory function	Page
M-MDS display	Air bag system warning light
	Flashing pattern		Priority ranking
B0001:11	19		15	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0001:12				Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13				Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19				Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A				Driver-side air bag module circuit resistance low	—	—	C, D	×
B0001:55				Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B0002:11]	19		15	Driver-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0002:12]				Driver-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0002:13]				Driver-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0002:19]				Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0002:1A]				Driver-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0002:55]				Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:11	21		14	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:12				Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13				Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19				Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A				Passenger-side air bag module circuit resistance low	—	—	C, D	×
B0010:55				Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B0011:11]	21		14	Passenger-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0011:12]				Passenger-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0011:13]				Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0011:19]				Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0011:1A]				Passenger-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0011:55]				Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
[B0072:11]	34		16	Passenger-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0072:12]				Passenger-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B0072:13]				Passenger-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B0072:19]				Short circuit to passenger-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B0072:1A]				Passenger-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B0072:55]				Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B0094:11	42		9	Crash zone sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B0094:11/B0094:13/B0094:87/B0094:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0094:13				Crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
B0094:87				Signal reception error from crash zone sensor	—	—	C, D	×
B0094:96				Crash zone sensor internal malfunction	—	—	C, D	×
B0094:55				Configuration setting error (crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B00A0:09]	16		26	Occupant classification sensor internal signal output unstable	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00A0:28]				Occupant classification sensor calibration check error	—	—	D	×
[B00A0:4A]	15		6	Occupant classification sensor ID mismatch	—	—	C, D	×
[B00A0:54]	16		26	Occupant classification sensor calibration setting not set	—	—	C, D	×
[B00A0:81]				Occupant classification sensor memory check sum error	—	—	C, D	×
[B00A0:87]				Signal reception error from occupant classification sensor	—	—	C, D	×
[B00A0:8F]				Seat weight sensor circuit open circuit or short to power supply	—	—	C, D	×
[B00B5:11]	49		28	Seat track position sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00B5:12]				Seat track position sensor circuit short to power supply	—	—	C, D	×
[B00B5:13]				Seat track position sensor circuit open circuit or resistance high	—	—	C, D	×
[B00B5:1D]				Seat track position sensor circuit resistance not within specification	—	—	C, D	×
[B00B5:55]				Configuration setting error (seat track position sensor structural malfunction)	—	—	C, D	×
[B00C0:93]	16		26	Occupant classification sensor malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00C1:93]				Occupant classification sensor malfunction	—	—	C, D	×
B00D2:01	―	―	―	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B00D2:29				Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B00D5:01]	18		27	PAD OFF indicator circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00D5:29]				Communication error with instrument cluster (PAD indicator light status mis-matched)	—	—	C, D	×
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:11	43		13	Driver-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:13				Driver-side side air bag sensor circuit open circuit or resistance high or short to power supply	—	—	C, D	×
B10FD:87				Signal reception error from driver-side side air bag sensor	—	—	C, D	×
B10FD:96				Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:55				Configuration setting error (driver-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:11	44		12	Passenger-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:13				Passenger-side side air bag sensor circuit open circuit or resistance high or short to power supply	—	—	C, D	×
B10FE:87				Signal reception error from passenger-side side air bag sensor	—	—	C, D	×
B10FE:96				Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:55				Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:11	22		21	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:12				Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13				Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19				Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A				Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55				Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:11	23		20	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:12				Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13				Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19				Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A				Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55				Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:11	24		23	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:12				Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13				Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19				Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A				Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55				Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:11	25		22	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:12				Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13				Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19				Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A				Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55				Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B1202:01]	18		27	PAD ON indicator circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
B1206:00	―	―	―	SAS control module collision judgment signal output (fuel cut signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:11	38		19	Driver-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:12				Driver-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13				Driver-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19				Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A				Driver-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55				Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:11	39		18	Passenger-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:12				Passenger-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13				Passenger-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19				Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A				Passenger-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55				Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B1226:11]	36		11	Driver-side pressure sensor or passenger-side side air bag sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1226:13]				Driver-side pressure sensor or passenger-side side air bag sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1226:87]				Signal reception error from driver-side pressure sensor	—	—	C, D	×
[B1226:96]				Driver-side pressure sensor internal malfunction	—	—	C, D	×
[B1226:55]				Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×
[B1227:11]	37		10	Passenger-side pressure sensor or driver-side side air bag sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1227:13]				Passenger-side pressure sensor or driver-side side air bag sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1227:87]				Signal reception error from passenger-side pressure sensor	—	—	C, D	×
[B1227:96]				Passenger-side pressure sensor internal malfunction	—	—	C, D	×
[B1227:55]				Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×
[B1228:11]	35		17	Driver-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]				Driver-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]				Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]				Short circuit to driver-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]				Driver-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]				Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1410:11]	33		25	Driver-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1410:12]				Driver-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1410:13]				Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1410:19]				Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1410:1A]				Driver-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1410:55]				Configuration setting error (Driver-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1412:11]	32		24	Passenger-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1412:12]				Passenger-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1412:13]				Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1412:19]				Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1412:1A]				Passenger-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1412:55]				Configuration setting error (Passenger-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B143A:00	―	―	―	SAS control module collision judgment signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B1A55:00]	―	―	―	SAS control module collision judgment signal output (collision detection signal output)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29/P0666:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
C0062:29				Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29				Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
P0666:29				Temperature sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	―	Continuously illuminated	1	Unit communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U0155:00	14		5	Communication error with instrument cluster	—	—	C, D	×
U0300:00	54		7	Configuration setting invalid	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U2005:68	14		5	PCM communication error (vehicle speed signal)	—	—	C, D	×	(See DTC U2005:68 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U2107:00	―	―	―	SAS control module collision judgment signal output (SCR request signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (8 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3003:17				SAS control module power supply voltage increases (18 V or more)	—	—	C, D	×

Inspection for DTCs not usually displayed so the related function is not equipped

Diagnostic procedure

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY •  Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
		No	Go to the next step.
2	PERFORM SAS CONTROL MODULE DTC INSPECTION •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Are the same Pending DTCs present?	Yes	Go to the next step.
		No	If DTC is displayed •  Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed •  DTC troubleshooting completed.
3	PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE) •  Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA) [STANDARD DEPLOYMENT CONTROL SYSTEM].) •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Are the same Pending DTCs present?	Yes	Go to the next step.
		No	If DTC is displayed •  Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed •  DTC troubleshooting completed.
4	PERFORM SAS CONTROL MODULE DTC INSPECTION •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Are the same Pending DTCs present?	Yes	Repeat the inspection from Step 2. •  If the malfunction recurs, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)
		No	If DTC is displayed •  Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) If DTC is not displayed •  DTC troubleshooting completed.