REAR BLOWER MOTOR INSPECTION
id071100020200
1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)
-
- (2) Selector lever knob (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
-
- (3) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
-
- (4) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
-
- (5) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
-
- (6) Rear console panel (See REAR CONSOLE PANEL REMOVAL/INSTALLATION.)
-
- (7) Rear cooler duct (See REAR COOLER DUCT REMOVAL/INSTALLATION.)
-
- (8) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
-
- (9) Selector lever component (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
-
- (10) Selector lever bracket (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
-
3. Remove the rear blower motor. (See REAR BLOWER MOTOR REMOVAL/INSTALLATION.)
4. Connect battery positive voltage to blower motor terminal B, connect terminal A to ground, and then verify its operation.
-
