LIFTGATE LIGHT INSPECTION

id091800822600

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts.

(1)  Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

(2)  Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Liftgate recess cover (See LIFTGATE RECESS REMOVAL/INSTALLATION.)

(4)  Power liftgate (PLG) rear switch (with power liftgate) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION.)

(5)  Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)

(6)  Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION.)

(7)  Request switch (liftgate) (with request switch) (See REQUEST SWITCH REMOVAL/INSTALLATION.)

(8)  Rear finisher (See REAR FINISHER REMOVAL/INSTALLATION.)

3.  Remove the liftgate light from the liftgate. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)

4.  Apply battery positive voltage to liftgate light terminal A, and connect the ground to terminal B.

ac8jjw00002736

5.  Verify that the taillight of the liftgate light turns on normally.

•  If the taillight does not turn on, replace the liftgate light. (See LIFTGATE LIGHT REMOVAL/INSTALLATION.)