BACKUP POWER SUPPLY BRACKET REMOVAL/INSTALLATION


id092100909100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
(2)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)
(3)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
(4)  Trunk side pocket (LH) (See BASS-BOX REMOVAL/INSTALLATION.)
(5)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
(6)  Bass-box (with Bose®) (See BASS-BOX REMOVAL/INSTALLATION.)
(7)  Third-row seat cushion (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
(8)  Third-row seat back component (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
(9)  Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
(10)  Backup power supply (See BACKUP POWER SUPPLY REMOVAL/INSTALLATION.)

3.  Remove the bolts.

ac8wzw00000392

4.  Pull the backup power supply bracket in the direction of the arrow shown in the figure and detach the clip from the body.

5.  Remove the backup power supply bracket.

6.  Install in the reverse order of removal.