DTC TABLE [BCM]


id0902f5347100

DTC No.

Detection condition

Description

Page

B1317
•  BCM power supply voltage from the battery is 16 V or more.
BCM power supply voltage high input
B1318
•  BCM power supply voltage from the battery is less than 9 V.
BCM power supply voltage low input
B1322
•  Short to ground in front door switch (driver-side) circuit with the front door (driver-side) closed (front door switch (driver-side) off).
Front door switch (driver-side) circuit malfunction
B1330
•  Short to ground in front door switch (passenger-side) circuit with the front door (passenger-side) closed (front door switch (passenger-side) off).
Front door switch (passenger-side) circuit malfunction
B1342
•  BCM detects the internal ECU malfunction.
BCM internal ECU malfunction
B1502
•  Short to ground in turn switch (LH) circuit with the turn switch off.
Turn switch (LH) circuit malfunction
B1506
•  Short to ground in turn switch (RH) circuit with the turn switch off.
Turn switch (RH) circuit malfunction
B1520*1
•  Open circuit in bonnet latch switch circuit with the bonnet closed (bonnet latch switch on).
Bonnet latch switch circuit malfunction
B1566
•  Short to ground in rear door switch (LH) or (RH) circuit with the rear doors closed (rear door switches off).
Rear door switch (LH)/(RH) circuit malfunction
B1614
•  Short to ground in rear wiper INT switch circuit with the rear wiper switch off.
Rear wiper INT switch circuit malfunction
B1873
•  Short to ground in hazard warning switch circuit with the hazard warning switch off.
Hazard warning switch circuit malfunction
B2218
•  Door lock switch (driver-side) or (passenger-side) circuit voltage is less than 3.75 V with the door lock switches off.
Door lock switch (driver-side)/(passenger-side) circuit malfunction
B2574
•  Short to ground in front door lock-link switch (driver-side) lock-side circuit with the front door lock-link switch (driver-side) unlocked.
Front door lock-link switch (driver-side) lock-side circuit malfunction
B257C*1
•  Open circuit in front door lock-link switch (passenger-side), rear door lock-link switch (LH) or (RH) circuit with the door lock-link switches unlocked.
Front door lock-link switch (passenger-side)/rear door lock-link switch (LH)/(RH) circuit malfunction
B2721
•  Short to ground in liftgate latch switch circuit with the liftgate closed (liftgate latch switch off).
Liftgate latch switch circuit malfunction
B2982
•  Open circuit in parking brake switch circuit with the parking brake lever pulled (parking brake switch on).
Parking brake switch circuit malfunction
C1189
•  Short to ground in brake fluid level sensor circuit with the brake fluid level on the upper side of the MIN.
Brake fluid level sensor circuit malfunction
C1295
•  BCM detects the steering angle sensor internal abnormality (signal overflow).
Steering angle sensor internal malfunction
C1307
•  BCM detects the steering angle sensor internal abnormality (signal jump).
Steering angle sensor encoder ring defective
C1441
•  Open circuit in steering angle sensor A signal circuit.
Steering angle sensor A signal circuit malfunction
C1442
•  Open circuit in steering angle sensor B signal circuit.
Steering angle sensor B signal circuit malfunction
C1443
•  Short to ground in steering angle sensor A signal circuit.
Steering angle sensor A signal circuit malfunction
C1444
•  Short to ground in steering angle sensor B signal circuit.
Steering angle sensor B signal circuit malfunction
C144A
•  Short to ground in steering angle sensor C signal circuit.
Steering angle sensor C signal circuit malfunction
C144B
•  Short to ground in steering angle sensor Z signal circuit.
Steering angle sensor Z signal circuit malfunction
C144C
•  Open circuit in steering angle sensor C signal circuit.
Steering angle sensor C signal circuit malfunction
C144D
•  Open circuit in steering angle sensor Z signal circuit.
Steering angle sensor Z signal circuit malfunction
C1937
•  BCM lost the steering angle initialization position.
Steering angle sensor offset failure
U0073
•  BCM detects a CAN bus communication line (HS-CAN) malfunction.
Module communication error (HS-CAN)
U0100
•  BCM cannot receive the CAN signal from the PCM for 5 s or more.
Communication error with PCM
U0101
•  BCM cannot receive the CAN signal from the TCM for 5 s or more.
Communication error with TCM
U0121
•  BCM cannot receive the CAN signal from the DSC/RSC HU/CM for 5 s or more.
Communication error with DSC/RSC HU/CM
U0401
•  BCM receives the invalid data from the PCM for 5 s or more.
Error signal from PCM

*1  :Vehicles with theft-deterrent system