DTC TABLE [SAS CONTROL MODULE (AIR BAG SYSTEM)]

id0802h3080700

Caution

•  When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC				System malfunction location	Fail-safe function	Drive cycle	Self test type*1	Memory function	Page
M-MDS display	Air bag system warning light
	Flashing pattern		Priority ranking
B0001:11	19		16	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0001:12				Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13				Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19				Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A				Driver-side air bag module circuit short circuit or resistance low	—	—	C, D	×
B0001:55	54		7	Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0010:11	21		15	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0010:12				Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13				Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19				Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A				Passenger-side air bag module circuit short circuit or resistance low	—	—	C, D	×
B0010:55	54		7	Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0050:55	54		7	Configuration setting error (driver-side buckle switch structural malfunction)	—	—	C, D	×	(See DTC B0050:55/B0052:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0052:55	54		7	Configuration setting error (passenger-side buckle switch structural malfunction)	—	—	C, D	×
B0094:11	42		10	Driver-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:12/B0094:29/B0094:2B/B0094:4A/B0094:87/B0094:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B0094:12				Driver-side crash zone sensor circuit short to power supply	—	—	C, D	×
B0094:29				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:2B				Short circuit to driver-side crash zone sensor and other air bag sensor circuits	—	—	C, D	×
B0094:4A				Driver-side crash zone sensor ID error	—	—	C, D	×
B0094:87				Signal reception error from driver-side crash zone sensor	—	—	C, D	×
B0094:96				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:55	54		7	Configuration setting error (driver-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:4A	15		6	Occupant classification sensor ID mismatch	—	—	C, D	×	(See DTC B00A0:4A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:09	16		22	Occupant classification sensor internal signal output unstable	—	—	C, D	×	(See DTC B00A0:09 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:28				Occupant classification sensor calibration setting invalid	—	—	D	×	(See DTC B00A0:28 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:54				Occupant classification sensor calibration setting not set	—	—	C, D	×	(See DTC B00A0:54 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:81				Occupant classification sensor memory check sum error	—	—	C, D	×	(See DTC B00A0:81/B00A0:87 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00A0:87				Communication error with occupant classification sensor	—	—	C, D	×
B00A0:55	54		7	Configuration setting error (occupant classification sensor structural malfunction)	—	—	C, D	×	(See DTC B00A0:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00C0:93	16		22	malfunction signal received from occupant classification sensor (occupant classification sensor mat structural malfunction)	—	—	C, D	×	(See DTC B00C0:93/B00C1:93 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00C1:93				malfunction signal received from occupant classification sensor (occupant classification sensor shield mat structural malfunction)	—	—	C, D	×	(See DTC B00C0:93/B00C1:93 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00D2:01	―	―	―	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00D2:29				Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00D5:01	18		23	PAD indicator circuit open circuit or short to power supply	—	—	C, D	×	(See DTC B00D5:01/B00D5:29 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B00D5:29				PAD indicator communication error	—	—	C, D	×
B00D5:55				Configuration setting error (PAD indicator structural malfunction)	—	—	C, D	×	(See DTC B00D5:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B10FD:11	43		14	Except Australian, European (L.H.D. U.K.), Israel specs. •  Driver-side side air bag sensor circuit short to body ground Australian, European (L.H.D. U.K.), Israel specs. •  Driver-side side air bag sensor or passenger-side pressure sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FD:11/B10FD:12/B10FD:29/B10FD:2B/B10FD:4A/B10FD:87/B10FD:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B10FD:12				Except Australian, European (L.H.D. U.K.), Israel specs. •  Driver-side side air bag sensor circuit short to power supply Australian, European (L.H.D. U.K.), Israel specs. •  Driver-side side air bag sensor or passenger-side pressure sensor circuit short to power supply	—	—	C, D	×
B10FD:29				Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:2B				Except Australian, European (L.H.D. U.K.), Israel specs. •  Short circuit to driver-side side air bag sensor and other air bag sensor circuits Australian, European (L.H.D. U.K.), Israel specs. •  Short circuit to driver-side side air bag sensor or passenger-side pressure sensor to other air bag sensor circuits	—	—	C, D	×
B10FD:4A				Driver-side side air bag sensor ID error	—	—	C, D	×
B10FD:87				Signal reception error from driver-side side air bag sensor	—	—	C, D	×
B10FD:96				Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:55	54		7	Configuration setting error (driver-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B10FE:11	44		13	Except Australian, European (L.H.D. U.K.), Israel specs. •  Passenger-side side air bag sensor circuit short to body ground Australian, European (L.H.D. U.K.), Israel specs. •  Passenger-side side air bag sensor or driver-side pressure sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FE:11/B10FE:12/B10FE:29/B10FE:2B/B10FE:4A/B10FE:87/B10FE:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B10FE:12				Except Australian, European (L.H.D. U.K.), Israel specs. •  Passenger-side side air bag sensor circuit short to power supply Australian, European (L.H.D. U.K.), Israel specs. •  Passenger-side side air bag sensor or driver-side pressure sensor circuit short to power supply	—	—	C, D	×
B10FE:29				Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:2B				Except Australian, European (L.H.D. U.K.), Israel specs. •  Short circuit to passenger-side side air bag sensor to other air bag sensor circuits Australian, European (L.H.D. U.K.), Israel specs. •  Short circuit to passenger-side side air bag sensor or driver-side pressure sensor to other air bag sensor circuits	—	—	C, D	×
B10FE:4A				Passenger-side side air bag sensor ID error	—	—	C, D	×
B10FE:87				Signal reception error from passenger-side side air bag sensor	—	—	C, D	×
B10FE:96				Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:55	54		7	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1126:11	22		21	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1126:12				Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13				Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19				Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A				Driver-side side air bag module circuit short circuit resistance low	—	—	C, D	×
B1126:55	54		7	Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1127:11	23		20	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1127:12				Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13				Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19				Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A				Passenger-side side air bag module circuit short circuit or resistance low	—	—	C, D	×
B1127:55	54		7	Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1206:00	―	―	―	SAS control module collision judgement signal output (fuel cut off signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1211:11	38		19	Driver-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1211:12				Driver-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13				Driver-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19				Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A				Driver-side pre-tensioner seat belt circuit short circuit or resistance low	—	—	C, D	×
B1211:55	54		7	Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1214:11	39		18	Passenger-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1214:12				Passenger-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13				Passenger-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19				Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A				Passenger-side pre-tensioner seat belt circuit short circuit or resistance low	—	—	C, D	×
B1214:55	54		7	Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1226:02	36		12	Signal reception error from driver or passenger-side pressure sensor	—	—	C, D	×	(See DTC B1226:02 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1226:29				Driver-side pressure sensor internal malfunction	—	—	C, D	×	(See DTC B1226:29/B1226:4A/B1226:87/B1226:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1226:4A				Driver-side pressure sensor ID error	—	—	C, D	×
B1226:87				Signal reception error from driver-side pressure sensor	—	—	C, D	×
B1226:96				Driver-side pressure sensor internal malfunction	—	—	C, D	×
B1226:55	54		7	Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×	(See DTC B1226:55, B1227:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1227:29	37		11	Passenger-side pressure sensor internal malfunction	—	—	C, D	×	(See DTC B1227:29/B1227:4A/B1227:87/B1227:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1227:4A				Passenger-side pressure sensor ID error	—	—	C, D	×
B1227:87				Signal reception error passenger-side pressure sensor	—	—	C, D	×
B1227:96				Passenger-side pressure sensor internal malfunction	—	—	C, D	×
B1227:55	54		7	Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×	(See DTC B1226:55, B1227:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
[B1228:11]	35		17	Lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]				Lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]				Lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]				Short circuit to lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]				Lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]	54		7	Configuration setting error (lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B1417:11	41		9	Passenger-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B1417:11/B1417:12/B1417:29/B1417:2B/B1417:4A/B1417:87/B1417:96 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1417:12				Passenger-side crash zone sensor circuit short to power supply	—	—	C, D	×
B1417:29				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:2B				Short circuit to passenger-side crash zone sensor to other air bag sensor circuits	—	—	C, D	×
B1417:4A				Passenger-side crash zone sensor ID error	—	—	C, D	×
B1417:87				Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
B1417:96				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:55	54		7	Configuration setting error (passenger-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B143A:00	―	―	―	SAS control module collision judgement signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
B1485:55	54		7	Configuration setting error (occupancy sensor structural malfunction)	—	—	C, D	×	(See DTC B1485:55 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
C0062:29				Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29				Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	―	Continuously illuminated	1	Unit communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U0100:00	14		5	PCM communication error or invalid value reception	—	—	C, D	×	(See DTC U0100:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U0155:00				Communication error with instrument cluster	—	—	C, D	×	(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U2100:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U2107:00	―	―	―	SAS control module collision judgement signal output (ESS signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
	―	Continuously illuminated	1
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (8 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
U3003:17				SAS control module power supply voltage increases (16 V or more)	—	—	C, D	×

Inspection for DTCs not usually displayed so the related function is not equipped

Diagnostic procedure

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY •  Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (AIR BAG SYSTEM)].)
		No	Go to the next step.
2	VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (AIR BAG SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (AIR BAG SYSTEM)].) •  Are the same DTCs displayed?	Yes	Go to the next step.
		No	DTC troubleshooting completed.
3	VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR •  Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA).) •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (AIR BAG SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (AIR BAG SYSTEM)].) •  Are the same DTCs displayed?	Yes	Re-perform the configuration, then perform the DTC inspection. •  If the same DTC is displayed, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
		No	DTC troubleshooting completed.