1. Disconnect the engine and automatic transaxle. (ATX) (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FN4A-EL].)
2. Disconnect the engine and manual transaxle. (MTX) (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [G35M-R].)
3. Remove the intake-air system. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF, L3].)
4. Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [LF, L3].)
5. Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [LF, L3].)
6. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [LF, L3].)
7. Remove the crankshaft position (CKP) sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [LF, L3].)
8. Assemble in the reverse order of disassembly.