INTERIOR LIGHT REMOVAL/INSTALLATION

id091800801500

Interior light

1.  Disconnect the negative battery cable.

2.  Partially peel back the seaming welt.

3.  Disconnect the rain sensor connector. (Vehicles auto light / wiper system)

4.  Remove the following parts (4SD):

(1)  Sunroof seaming welt (vehicles with sunroof system)

(2)  A‐pillar trims (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Upper anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  B-pillar lower trims (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)  B‐pillar upper trims (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION [4SD].)

(9)  Rear side seat back (See REAR SIDE SEAT BACK REMOVAL/INSTALLATION.)

(10)  Tire house trims (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(11)  C‐pillar trims (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

5.  Remove the following parts (5HB):

(1)  Sunroof seaming welt (vehicles with sunroof only)

(2)  A‐pillar trims (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Upper anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  B-pillar lower trims (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)  B‐pillar upper trims (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)  Tire house trims (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(9)  Trunk side upper trims (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(10)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION [5HB/WAGON].)

(11)  Lower anchor of the rear seat belt installation bolts (LH) (See REAR SEAT BELT REMOVAL/INSTALLATION [4SD].)(See REAR SEAT BELT REMOVAL/INSTALLATION [5HB, WGN].)

(12)  C‐pillar trims (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

6.  Remove the following parts (WGN):

(1)  Sunroof seaming welt (vehicles with sunroof only)

(2)  A‐pillar trims (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Upper anchor of the front seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(4)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  B-pillar lower trims (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)  B‐pillar upper trims (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)  Tire house trims (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(9)  Trunk side upper trims (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(10)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION [5HB/WAGON].)

(11)  Lower anchor of the rear seat belt installation bolts (LH) (See REAR SEAT BELT REMOVAL/INSTALLATION [4SD].)(See REAR SEAT REMOVAL/INSTALLATION [5HB/WAGON].)

(12)  C‐pillar trims (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(13)  D-pillar trims (See D-PILLAR TRIM REMOVAL/INSTALLATION.)

7.  Disconnect the auto-dimming mirror connector. (vehicles with auto-dimming mirror)

8.  Remove the sunvisors. (See SUNVISOR REMOVAL/INSTALLATION.)

9.  Remove the assist handle. (See ASSIST HANDLE REMOVAL/INSTALLATION.)

10.  Remove the headliner. (See HEADLINER REMOVAL/INSTALLATION.)

11.  Detach the tab and remove the bulb housing.

ac9uuw00000792

Note

•  The valve housing and the wiring harness have been integrated and attached to the headliner. When replacing the valve housing, remove the wiring harness which passes under the urethane by cutting the urethane.

12.  Pull in the direction of the arrows and detach the tabs.

ac9uuw00000793

13.  Remove the interior light.

14.  Install in the reverse order of removal.

Note

•  After installing the wiring harness, reinforce the urethane that was cut when removing the valve housing with vinyl tape.

Interior light bulb

1.  Disconnect the negative battery cable.

2.  Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

am8rrw00001214

3.  Remove the rear interior light bulb.

ac9uuw00000794

4.  Install in the reverse order of removal.