VENTILATOR GRILLE REMOVAL/INSTALLATION

id091700804600

Driver’s Side

1.  Detach tabs A from the dashboard using a tape-wrapped flathead screwdriver.

absggw00001839

2.  Remove the ventilator grille.

3.  Install in the reverse order of removal.

Passenger’s Side

1.  Detach tabs A from the dashboard using a tape-wrapped flathead screwdriver.

absggw00001840

2.  Remove the ventilator grille.

3.  Install in the reverse order of removal.

Center

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(2)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(3)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(4)  Oil unit (See CLIMATE CONTROL UNIT REMOVAL.) (See CLIMATE CONTROL UNIT INSTALLATION.)

(5)  Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(6)  Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

(7)  Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(8)  Clock spring (See CLOCK SPRING REMOVAL/INSTALLATION.)

(9)  Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

(10)  Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(11)  Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(12)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(13)  Rear scuff plate (Freestyle cab) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(14)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(15)  Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(16)  Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(17)  Fuel-filler lid opener (See FUEL-FILLER LID AND OPENER REMOVAL/INSTALLATION.)

(18)  Roof side trim (Freestyle cab) (See ROOF SIDE TRIM REMOVAL/INSTALLATION.)

(19)  Rear seat back (Double cab) (See REAR SEAT REMOVAL/INSTALLATION.)

(20)  Rear seat belt upper anchor installation bolt (Double cab) (See SEAT BELT REMOVAL/INSTALLATION.)

(21)  C-pillar trim (Double cab) (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(22)  B-pillar lower trim (Double cab) (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(23)  Front seat belt upper anchor installation bolt (Double cab, regular cab) (See SEAT BELT REMOVAL/INSTALLATION.)

(24)  B-pillar upper trim (Double cab) (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(25)  B-pillar trim (Regular cab) (See B-PILLAR TRIM REMOVAL/INSTALLATION.)

(26)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(27)  Fuse block

(28)  Passenger’s-side air bag module (See PASSENGER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(29)  Dashboard (See DASHBOARD REMOVAL/INSTALLATION.)

(30)  Side demister nozzle (See DASHBOARD DISASSEMBLY/ASSEMBLY.)

(31)  Center duct (See DASHBOARD DISASSEMBLY/ASSEMBLY.)

3.  Remove the screws or tabs.

absggw00001841

4.  Remove the ventilator grille.

5.  Install in the reverse order of removal.