DTC TABLE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

id09021c960500

DTC

Description

Reference

M-MDS display
B100B:11
Short to ground in steering lock unit ground circuit
(See DTC B100B:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B100B:15
Open circuit or short to power supply in steering lock unit ground circuit
(See DTC B100B:15 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B100C:11
Short to ground in steering lock unit power supply circuit
(See DTC B100C:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B100C:12
Short to power supply in steering lock unit power supply circuit
(See DTC B100C:12 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:08
Receiving erratic signal from steering lock unit
(See DTC B1026:08 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:51
Steering lock unit programming error
(See DTC B1026:51 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:71
Steering lock unit malfunction
(See DTC B1026:71 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:87
Communication error between keyless control module and steering lock unit
(See DTC B1026:87 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:92
Incorrect operation of steering lock unit
(See DTC B1026:92 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1026:96
Steering lock unit internal malfunction
(See DTC B1026:96 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B102B:51
No programmed transmitter
(See DTC B102B:51 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B108B:23
Short to ground in push button start 1 circuit
(See DTC B108B:23 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B108B:29
Mismatch state of push button start 1 and 2
(See DTC B108B:29 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B108C:23
Short to ground in push button start 2 circuit
(See DTC B108C:23 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10C6:1F
Erratic signal of keyless antenna (exterior, rear)
(See DTC B10C6:1F [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10C7:1F
Erratic signal of keyless antenna (interior, rear)
(See DTC B10C7:1F [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10C9:1F
Erratic signal of keyless antenna (interior, front)
(See DTC B10C9:1F [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10E7:11
Short to ground in IG1 relay circuit
(See DTC B10E7:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10E7:12
Short to power supply in IG1 relay circuit
(See DTC B10E7:12 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10E7:16
Low voltage in IG1 monitor input circuit
(See DTC B10E7:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B10E7:17
High voltage in IG1 monitor input circuit
(See DTC B10E7:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B112A:11
Short to ground in IG2 relay circuit
(See DTC B112A:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B112A:12
Short to power supply in IG2 relay circuit
(See DTC B112A:12 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B112A:16
Low voltage in IG2 monitor input circuit
(See DTC B112A:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B112A:17
High voltage in IG2 monitor input circuit
(See DTC B112A:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1140:29*3
Erratic signal of starter interlock switch
(See DTC B1140:29 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B11FD:1F
Erratic signal of keyless antenna (exterior, LF)
(See DTC B11FD:1F [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
B1210:1F
Erratic signal of keyless antenna (exterior, RF)
(See DTC B1210:1F [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
C0040:29*2
Erratic signal of brake switch
(See DTC C0040:29 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0560:16
Low voltage in power supply circuit (+B3)
(See DTC P0560:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0560:17
High voltage in power supply circuit (+B3)
(See DTC P0560:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0615:11
Short to ground in starter relay circuit
(See DTC P0615:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0615:12
Short to power supply in starter relay circuit
(See DTC P0615:12 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0615:13
Open circuit in starter relay circuit
(See DTC P0615:13 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P081C:62*2
Mis-match signal between CAN and P range switch
(See DTC P081C:62 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P081D:62*1
Mis-match signal between CAN and neutral switch
(See DTC P081D:62 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0830:23*1
Short to ground in CPP switch circuit
(See DTC P0830:23 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P0850:29*2
Erratic signal of TR switch
(See DTC P0850:29 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P1708:29*1
Erratic signal of CPP switch and/or starter interlock switch
(See DTC P1708:29 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P1794:16
Low voltage in power supply circuit (+B2)
(See DTC P1794:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
P1794:17
High voltage in power supply circuit (+B2)
(See DTC P1794:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U0001:88
Keyless control module communication error (HS-CAN)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 1.5))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI i-stop, MZR 1.5))].)
U0028:87
Communication error with BCM
(See DTC U0028:87 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U0100:00
Communication error with PCM
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 1.5))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2, MZR 2.0 DISI i-stop))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI i-stop, MZR 1.5))].)
U0101:00*2
Communication error with TCM
U0121:00
Communication error with ABS HU/CM or DSC HU/CM
U201F:11
Short to ground in keyless receiver circuit
(See DTC U201F:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U2100:00
Incomplete configuration
(See DTC U2100:00 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3000:49
Keyless control module internal malfunction
(See DTC U3000:49 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3000:96
Keyless control module internal malfunction
(See DTC U3000:96 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3003:16
Low voltage in power supply circuit (+B1)
(See DTC U3003:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3003:17
High voltage in power supply circuit (+B1)
(See DTC U3003:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3004:11
Short to ground in ACC relay circuit
(See DTC U3004:11 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3004:12
Short to power supply in ACC relay circuit
(See DTC U3004:12 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3004:16
Low voltage in ACC monitor input circuit
(See DTC U3004:16 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
U3004:17
High voltage in ACC monitor input circuit
(See DTC U3004:17 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

*1  :MTX
*2  :ATX
*3  :With i-stop

Vehicles With Immobilizer System

DTC

Description

Reference

M-MDS display

Security light flashing pattern
B10D5:13
Coil antenna malfunction
(See SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D7:05
Key ID number error
(See SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D7:51
Unprogrammed key ID number
(See SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D7:81
Receiving erratic serial data
(See SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D7:94
Key ID number error
(See SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D8:00
Shortage of programmed key
(See SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10D9:87
Communication error with coil antenna
(See SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10DA:51
Communication error with PCM (Data transfer failure)
(See SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10DA:62
Communication error with PCM (Data mis-match)
(See SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10E6:11
Not illuminated
Short to ground in coil antenna power supply circuit
(See SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:11/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
B10E6:12
Not illuminated
Short to power supply in coil antenna power supply circuit
(See SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:12/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)
U0100:87
Communication error with PCM (No response)
(See SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)].)