DTC U2005:86 [INSTRUMENT CLUSTER]

id0902e8509800

DESCRIPTION

Error signal from PCM
DETECTION CONDITION
•  Instrument cluster receives the error vehicle speed signal from PCM.
POSSIBLE CAUSE
•  PCM DTC is stored.
•  PCM malfunction
•  Instrument cluster malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
CONFIRM PCM DTC
•  Perform the PCM DTC inspection using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [MZR 1.5, MZR 1.6].)
(See DTC TABLE [MZR 2.0, MZR 2.5].)
(See DTC TABLE [MZR 2.0 DISI i-stop].)
(See DTC TABLE [MZR 2.3 DISI Turbo].)
(See DTC TABLE [MZ-CD 1.6].)
(See DTC TABLE [MZR-CD 2.2].)
(See DTC TABLE [SKYACTIV-G 2.0].)
No
Go to the next step.
2
PERFORM DTC INSPECTION AND VERIFY THAT MALFUNCTIONING PART IS PCM
•  Clear the DTC from the instrument cluster using the M-MDS.
•  Switch the ignition to ON and wait for 20 s or more.
•  Perform the instrument cluster DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)
(See PCM REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)
(See PCM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)
(See PCM REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)
(See PCM REMOVAL/INSTALLATION [MZ-CD 1.6].)
(See PCM REMOVAL/INSTALLATION [MZR-CD 2.2].)
(See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
No
Go to Step 4.
3
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the instrument cluster using the M-MDS.
•  Switch the ignition to ON and wait for 20 s or more.
•  Perform the instrument cluster DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Replace the instrument cluster, then go to the next step.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
No
Go to the next step.
4
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
DTC troubleshooting completed.