ANTENNA FEEDER NO.1 INSPECTION

id092000812400

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)(See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)(See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)(See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)(See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

2.  Remove the following parts:

(1)  Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(2)  Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(3)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(4)  Center lower panel (Vehicles without audio unit) (See CENTER LOWER PANEL REMOVAL/INSTALLATION.)

(5)  Audio unit (Vehicles with audio unit) (See AUDIO UNIT REMOVAL/INSTALLATION.)

(6)  Center cover (See CENTER COVER REMOVAL/INSTALLATION.)

(7)  Dashboard upper panel (See DASHBOARD UPPER PANEL REMOVAL/INSTALLATION.)

(8)  Hole cover (See HOLE COVER REMOVAL/INSTALLATION.)

(9)  Multi information display (See MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION.)

3.  Disconnect the GPS antenna connector. (VIN:JM0**, JM7**) (See GPS ANTENNA FEEDER REMOVAL/INSTALLATION.)

4.  Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.

am3zzw00007663

•  If not as indicated in the table, replace antenna feeder No.1.

am3zzw00007664