BASIC INSPECTION [FS5A-EL]

id050308800300

STEP

INSPECTION

ACTION

1

Measure the battery voltage.

Is the battery voltage 10.0—14.0 V?

Yes

Go to the next step.

No

Recharge or replace the battery.

(See BATTERY RECHARGING [MZR 1.8, MZR 2.0, MZR 2.5].)

(See BATTERY RECHARGING [MZR 2.0 DISI].)

(See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

(See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI].)

2

Inspect the TCM related harnesses, connectors and fuses.

Are they normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

3

Switch the ignition to ON.

When the selector lever is moved, does the gear position indicator light indication correspond to the selector lever position?

Also, when other ranges are selected from N or P during idling, does the vehicle move within 1—2 s?

Yes

Go to the next step.

No

Inspect the selector lever and TR switch.

(See SELECTOR LEVER COMPONENT INSPECTION.)

(See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].)

•  If the selector lever and TR switch has a malfunction:

―  Repair or replace any malfunctioning parts according to the inspection result.
(See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(See TRANSAXLE RANGE (TR) SWITCH REMOVAL [FS5A-EL].)

(See TRANSAXLE RANGE (TR) SWITCH INSTALLATION [FS5A-EL].)

•  If the selector lever and TR switch are normal:

―  Go to the next step.

4

Perform the road test.

(See ROAD TEST [FS5A-EL].)

Is the ATX operating normally?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

5

Inspect the ATF color and condition.

(See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FS5A-EL].)

Are the ATF color and odor normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

Flush the ATX and cooler line if necessary.

6

Perform the line pressure test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the line pressure normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

7

Perform the stall test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the stall speed normal?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

8

Perform the time lag test.

(See MECHANICAL SYSTEM TEST [FS5A-EL].)

Is the time lag within the specified?

Yes

Go to the next step.

No

Repair or replace any malfunctioning parts according to the inspection result.

9

Inspect the value at the following PCM and TCM PIDs using the M-MDS.

(See ON-BOARD DIAGNOSTIC TEST [MZR 1.8, MZR 2.0, MZR 2.5].)

(See ON-BOARD DIAGNOSTIC TEST [MZR 2.0 DISI].)

(See ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR INSPECTION [FS5A-EL].)

PCM PIDs:

•  APP

•  ECT

•  RPM

•  VPWR

TCM PIDs:

•  TFT

•  TFTV

•  TR

•  TR_SENS

•  MNL SW

•  DWN SW

•  UP SW

•  THOP

•  TSS

•  OSS

•  VPWR

Are the PID values normal?

(See PCM INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5].)

(See PCM INSPECTION [MZR 2.0 DISI].)

Yes

Perform the symptom troubleshooting and follow the procedures.

No

Repair or replace any malfunctioning parts according to the inspection result.

STEP	INSPECTION		ACTION
1	Measure the battery voltage. Is the battery voltage 10.0—14.0 V?	Yes	Go to the next step.
1		No	Recharge or replace the battery. (See BATTERY RECHARGING [MZR 1.8, MZR 2.0, MZR 2.5].) (See BATTERY RECHARGING [MZR 2.0 DISI].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI].)
2	Inspect the TCM related harnesses, connectors and fuses. Are they normal?	Yes	Go to the next step.
2		No	Repair or replace any malfunctioning parts according to the inspection result.
3	Switch the ignition to ON. When the selector lever is moved, does the gear position indicator light indication correspond to the selector lever position? Also, when other ranges are selected from N or P during idling, does the vehicle move within 1—2 s?	Yes	Go to the next step.
3		No	Inspect the selector lever and TR switch. (See SELECTOR LEVER COMPONENT INSPECTION.) (See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].) • If the selector lever and TR switch has a malfunction: ― Repair or replace any malfunctioning parts according to the inspection result. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See TRANSAXLE RANGE (TR) SWITCH REMOVAL [FS5A-EL].) (See TRANSAXLE RANGE (TR) SWITCH INSTALLATION [FS5A-EL].) • If the selector lever and TR switch are normal: ― Go to the next step.
4	Perform the road test. (See ROAD TEST [FS5A-EL].) Is the ATX operating normally?	Yes	Go to the next step.
4		No	Repair or replace any malfunctioning parts according to the inspection result.
5	Inspect the ATF color and condition. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FS5A-EL].) Are the ATF color and odor normal?	Yes	Go to the next step.
5		No	Repair or replace any malfunctioning parts according to the inspection result. Flush the ATX and cooler line if necessary.
6	Perform the line pressure test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the line pressure normal?	Yes	Go to the next step.
6		No	Repair or replace any malfunctioning parts according to the inspection result.
7	Perform the stall test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the stall speed normal?	Yes	Go to the next step.
7		No	Repair or replace any malfunctioning parts according to the inspection result.
8	Perform the time lag test. (See MECHANICAL SYSTEM TEST [FS5A-EL].) Is the time lag within the specified?	Yes	Go to the next step.
8		No	Repair or replace any malfunctioning parts according to the inspection result.
9	Inspect the value at the following PCM and TCM PIDs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [MZR 1.8, MZR 2.0, MZR 2.5].) (See ON-BOARD DIAGNOSTIC TEST [MZR 2.0 DISI].) (See ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR INSPECTION [FS5A-EL].) PCM PIDs: • APP • ECT • RPM • VPWR TCM PIDs: • TFT • TFTV • TR • TR_SENS • MNL SW • DWN SW • UP SW • THOP • TSS • OSS • VPWR Are the PID values normal? (See PCM INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5].) (See PCM INSPECTION [MZR 2.0 DISI].)	Yes	Perform the symptom troubleshooting and follow the procedures.
9		No	Repair or replace any malfunctioning parts according to the inspection result.