AIR INTAKE LINK SET REMOVAL/INSTALLATION

id071100817000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Glove compartment cover (See GLOVE COMPARTMENT COVER REMOVAL/INSTALLATION.)

(3)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(4)  Heat duct (RH) (L.H.D.) (See HEAT DUCT COMPONENT REMOVAL/INSTALLATION.)

(5)  Heat duct (LH) (R.H.D.) (See HEAT DUCT COMPONENT REMOVAL/INSTALLATION.)

(6)  Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [B65M-R].)

(7)  Boot panel (See FRONT CONSOLE COMPONENT DISASSEMBLY/ASSEMBLY.)

(8)  Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(9)  Front console (See FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION.)

(10)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(11)  Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(12)  Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(13)  Lower panel (driver-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

(14)  Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(15)  Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [L.H.D.].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [R.H.D.].)

(16)  Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(17)  Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(18)  Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(19)  Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

(20)  Center panel unit (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)

(21)  Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].) (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER].)

(22)  Sift lever component (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [B65M-R].)

(23)  Selector lever component (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(24)  Interlock unit (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(25)  Lower panel (passenger-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

(26)  Side panel (See SIDE PANEL REMOVAL/INSTALLATION.)

(27)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(28)  Windshield wiper blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

(29)  Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)

(30)  Steering shaft cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [L.H.D.].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [R.H.D.].)

(31)  Steering shaft (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [L.H.D.].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [R.H.D.].)

3.  Disconnect the dashboard wiring harness connector.

4.  Disconnect the antenna feeder No.1 jack.

5.  Remove the dashboard. (See DASHBOARD REMOVAL/INSTALLATION.)

6.  Remove the air intake actuator. (full-auto air conditioner) (See AIR INTAKE ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)

7.  Disconnect the air intake wire. (manual air conditioner) (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER].)

Caution

•  Apply only the specified grease to links and cranks. Otherwise abnormal noise or improper operation may result.

8.  Remove in the order indicated in the table.

am2zzw00001057

1	Bushing nut (manual air conditioner)
2	Link collar (1) (manual air conditioner)
3	Spring (manual air conditioner)
4	Link collar (2) (manual air conditioner)
5	Air intake link (manual air conditioner)
6	Air intake crank

9.  Install in the reverse order of removal.