FRONT FENDER PANEL REMOVAL/INSTALLATION

id091000405900

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front side turn lights (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)

(2)  Radiator grille (See RADIATOR GRILLE REMOVAL/INSTALLATION.)

(3)  Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)

(4)  Front combination lights. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(5)  Side step molding (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)

(6)  Front fender molding (See COWL GRILLE REMOVAL/INSTALLATION.)

(7)  Front mudguard (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

3.  Remove bolts, then remove the front fender panel in the direction of the arrow shown in the figure.

am6zzw00006786

4.  Install in the reverse order of removal.

5.  Adjust the headlight aiming. (See HEADLIGHT AIMING)