DTC TABLE [BCM]
id0902f5347100
DTC table
|
DTC No. |
Description |
Detection condition |
Page |
|---|---|---|---|
|
B1B55:96
|
Rain sensor internal circuit malfunction
|
Rain sensor malfunction
|
(See DTC B1B55:96 [BCM].)
|
|
B1C53:13
|
Windshield wiper switch internal circuit malfunction
|
Windshield wiper switch INT circuit malfunction
|
(See DTC B1C53:13 [BCM].)
|
|
B1D06:11
|
Turn light (LH) circuit malfunction
|
Short circuit to ground in wiring harness between turn light (LH) and BCM
|
(See DTC B1D06:11 [BCM].)
|
|
B1D06:15
|
Turn light (LH) circuit malfunction
|
Open circuit or short to power supply in wiring harness between turn light (LH) and BCM
|
(See DTC B1D06:15 [BCM].)
|
|
B1D07:11
|
Turn light (RH) circuit malfunction
|
Short to ground in wiring harness between turn light (RH) and BCM
|
(See DTC B1D07:11 [BCM].)
|
|
B1D07:15
|
Turn light (RH) circuit malfunction
|
Open circuit or short to power supply in wiring harness between turn light (RH) and BCM
|
(See DTC B1D07:15 [BCM].)
|
|
B1D13:12
|
Interior light circuit malfunction
|
Short to power supply in wiring harness between interior light and BCM
|
(See DTC B1D13:12 [BCM].)
|
|
B1D35:11
|
Hazard warning switch circuit malfunction
|
Short to ground in wiring harness between hazard warning switch and BCM for 10s or more
|
(See DTC B1D35:11 [BCM].)
|
|
B1D36:92
|
Turn switch circuit malfunction
|
Short to ground in wiring harness between turn switch and BCM
|
(See DTC B1D36:92 [BCM].)
|
|
B10A6:92
|
Light switch circuit malfunction
|
Short to ground in wiring harness between light switch and BCM
|
(See DTC B10A6:92 [BCM].)
|
|
B1008:11
|
Windshield wiper switch circuit malfunction
|
Short to ground in wiring harness between wind shield wiper and washer switch (windshield wiper INT) and BCM
|
(See DTC B1008:11 [BCM].)
|
|
B1013:23
|
Rear window defroster switch circuit malfunction
|
Rear window defroster switch is in a pressed condition for 2 min or more (rear defroster switch stuck)
|
(See DTC B1013:23 [BCM].)
|
|
B1087:83
|
Rain sensor communication error
|
Communication error between rain sensor and BCM
|
|
|
B1087:86
|
Communication error from rain sensor
|
||
|
B1087:87
|
No response from rain sensor
|
||
|
B1087:88
|
Rain sensor BUS off
|
||
|
B1172:92
|
Door lock link switch circuit malfunction
|
Lock/unlock signals are input simultaneously for 6 s or more
|
(See DTC B1172:92 [BCM].)
|
|
B1175:13
|
Front door latch switch (driver's side) circuit malfunction
|
Open circuit in wiring harness between front door latch switch in front door latch and lock actuator (driver's side) and BCM
|
(See DTC B1175:13 [BCM].)
|
|
B1176:13
|
Front door latch switch (passenger's side) circuit malfunction
|
Open circuit in wiring harness between front door latch switch in front door latch and lock actuator (passenger's side) and BCM
|
(See DTC B1176:13 [BCM].)
|
|
B1178:11
|
Liftgate latch switch circuit malfunction
|
Short to ground in wiring harness between liftgate latch switch in liftgate latch and lock actuator and BCM
|
(See DTC B1178:11 [BCM].)
|
|
U0001:88
|
Unit communication error
|
BCM CAN system error
|
|
|
U0028:81
|
• Communication error with keyless control module (vehicles with advanced keyless and start system)
• Communication error with keyless receiver (vehicles with keyless entry system)
|
• Communication error between keyless control module and BCM (vehicles with advanced keyless and start system)
• Communication error between keyless receiver and BCM (vehicles with keyless entry system)
|
|
|
U0028:83
|
• Error signal from keyless control module (vehicles with advanced keyless and start system)
• Error signal from keyless receiver (vehicles with keyless entry system)
|
||
|
U0028:87
|
• No response from keyless control module (vehicles with advanced keyless and start system)
• No response from keyless receiver (vehicles with keyless entry system)
|
||
|
U0100:00
|
Communication error with PCM
|
Communication error between PCM and BCM
|
|
|
U0121:00
|
• Communication error with ABS HU/CM (with ABS)
• Communication error with DSC HU/CM (with DSC)
|
• Communication error between ABS HU/CM and BCM (with ABS)
• Communication error between DSC HU/CM and BCM (with DSC)
|
|
|
U0415:68
|
• Error signal from ABS HU/CM (with ABS)
• Error signal from DSC HU/CM (with DSC)
|
• Correct data cannot be received from ABS HU/CM (with ABS)
• Correct data cannot be received from DSC HU/CM (with DSC)
|
(See DTC U0415:68 [BCM].)
|
|
U2100:00
|
BCM configuration not set
|
BCM configuration setting not done correctly
|
(See DTC U2100:00/U3000:44 [BCM].)
|
|
U3000:44
|
BCM configuration setting invalid
|
||
|
U3003:16
|
BCM power supply voltage low (less than 10 V).
|
BCM power supply voltage less than 10 V
|
(See DTC U3003:16/U3003:17 [BCM].)
|
|
U3003:17
|
BCM power supply voltage high (16 V or more).
|
BCM power supply voltage 16 V or more
|