BLOWER UNIT REMOVAL/INSTALLATION
id071100800500
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (2) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (3) Front scuff plates (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (4) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (5) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (6) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM LOCATION INDEX [G35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM LOCATION INDEX [G66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM LOCATION INDEX [A26M-R].)
- (8) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (9) Center panel lower (See CENTER PANEL LOWER REMOVAL/INSTALLATION.)
- (10) Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)(See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER].)
- (11) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (12) Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
- (13) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (14) Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
- (15) Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
- (16) Column cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)
- (17) Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)
- (18) Meter hood (See METER HOOD REMOVAL/INSTALLATION.)
- (19) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
- (20) Center panel upper (See CENTER PANEL UPPER REMOVAL/INSTALLATION.)
- (21) Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)
- (22) Steering shaft cover (See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION [L.H.D.].) (See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION [R.H.D.].)
- (23) Steering shaft (See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION [L.H.D.].) (See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION [R.H.D.].)
- (24) Side panel (See SIDE PANEL REMOVAL/INSTALLATION.)
- (25) Dashboard upper garnish (See DASHBOARD UPPER GARNISH REMOVAL/INSTALLATION.)
- (26) A-pillar trims (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (27) Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
- (28) Front fender molding (See COWL GRILLE REMOVAL/INSTALLATION.)
- (29) Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)
- (30) Dashboard (See DASHBOARD REMOVAL/INSTALLATION.)
3. Disassemble the dashboard with the blower unit.
L.H.D.
R.H.D.
4. Install in the reverse order of removal.
