DTC TABLE [BCM]

DTC No.	Description	Detection condition	Reference
B1C45:12	Autostop switch circuit malfunction	• Short to power supply in wiring harness between windshield wiper motor and BCM.	(See DTC B1C45:12 [BCM].)
B1D35:11	Hazard warning switch circuit malfunction	• Short to ground in hazard warning switch circuit with the hazard warning switch off.	(See DTC B1D35:11 [BCM].)
B1D36:11	Turn switch circuit malfunction	• Short to ground in turn switch LH or RH circuit with the turn switch off.	(See DTC B1D36:11 [BCM].)
B10A5:49^*1	Theft-deterrent siren internal malfunction	• Theft-deterrent siren internal malfunction.	(See DTC B10A5:49 [BCM].)
B10A5:86^*1	Signal error from theft-deterrent siren	• Signal error from theft-deterrent siren.	(See DTC B10A5:86 [BCM].)
B10A5:87^*1	Communication error between theft-deterrent siren and BCM	• Communication error between theft-deterrent siren and BCM.	(See DTC B10A5:87 [BCM].)
B10AD:49^*2	Rain sensor malfunction	• BCM detects the rain sensor internal malfunction continuously for 10 times.	(See DTC B10AD:49 [BCM].)
B10AD:87^*2	Communication error between rain sensor and BCM	• BCM detects the communication missing with the rain sensor continuously for 10 times.	(See DTC B10AD:87 [BCM].)
B10D0:11	Trunk lid opener switch (4SD)/Liftgate opener switch (5HB, WAGON) circuit malfunction	• Short to ground in trunk lid opener switch (4SD)/liftgate opener switch (5HB, WAGON) circuit.	(See DTC B10D0:11 [BCM].)
B1008:11	Windshield wiper switch circuit malfunction	• Short to ground in windshield wiper switch circuit with the windshield wiper switch off.	(See DTC B1008:11 [BCM].)
B1046:11^*3	Front fog light switch circuit malfunction	• Short to ground in front fog light switch circuit with the front fog light switch off.	(See DTC B1046:11 [BCM].)
B1047:11^*4	Rear fog light switch circuit malfunction	• Short to ground in rear fog light switch circuit with the rear fog light switch off.	(See DTC B1047:11 [BCM].)
B1048:11	Brake fluid level sensor circuit malfunction	• Short to ground in brake fluid level sensor circuit with the brake fluid amount below the lower side of the minimum.	(See DTC B1048:11 [BCM].)
B1051:11	Windshield washer switch circuit malfunction	• Short to ground in windshield washer switch circuit with the windshield washer switch off.	(See DTC B1051:11 [BCM].)
B1052:11	Rear washer switch circuit malfunction	• Short to ground in rear washer switch circuit with the rear washer switch off.	(See DTC B1052:11 [BCM].)
B1079:13^*5	Bonnet latch switch circuit malfunction	• Open circuit in bonnet latch switch circuit with the bonnet closed (bonnet latch switch on).	(See DTC B1079:13 [BCM].)
B109F:49^*1	Intruder sensor internal malfunction	• Intruder sensor internal malfunction.	(See DTC B109F:49 [BCM].)
B109F:86^*1	Signal error from intruder sensor	• Signal error from intruder sensor.	(See DTC B109F:86 [BCM].)
B109F:87^*1	Communication error between intruder sensor and BCM	• Communication error between intruder sensor and BCM.	(See DTC B109F:87 [BCM].)
B11C0:13	Rear door latch switch (driver’s side) circuit malfunction	• Open circuit in rear door latch switch (driver’s side) circuit with the rear door (driver’s side) closed (rear door latch switch (driver’s side) on).	(See DTC B11C0:13 [BCM].)
B11C1:13	Rear door latch switch (passenger’s side) circuit malfunction	• Open circuit in rear door latch switch (passenger’s side) circuit with the rear door (passenger’s side) closed (rear door latch (passenger’s side) switch on).	(See DTC B11C1:13 [BCM].)
B11DA:11	Front door key cylinder switch (driver’s side) circuit malfunction	• Short to ground in front door key cylinder switch (driver’s side) circuit with the front door key cylinder switch (driver’s side) off.	(See DTC B11DA:11 [BCM].)
B11DC:11	Rear wiper switch circuit malfunction	• Short to ground in rear wiper switch circuit with the rear wiper switch off.	(See DTC B11DC:11 [BCM].)
B1130:11	Light switch circuit malfunction	• Short to ground in light switch circuit with the light switch off.	(See DTC B1130:11 [BCM].)
B1172:11	Door lock-link switch (driver’s side) lock-side circuit malfunction	• Short to ground in door lock-link switch (driver’s side) lock-side circuit with the door lock-link switch (driver’s side) unlocked.	(See DTC B1172:11 [BCM].)
B1172:13	Door lock-link switch (driver’s side) unlock-side circuit malfunction	• Open circuit in door lock-link switch (driver’s side) unlock-side circuit with the door lock-link switch (driver’s side) unlocked.	(See DTC B1172:13 [BCM].)
B1174:13	Door lock-link switch circuit malfunction	• Open circuit in door lock-link switch circuit with the door lock-link switch unlocked.	(See DTC B1174:13 [BCM].)
B1175:13	Front door latch switch (driver’s side) circuit malfunction	• Open circuit in front door latch switch (driver’s side) circuit with the front door (driver’s side) closed (front door latch switch (driver’s side) on).	(See DTC B1175:13 [BCM].)
B1176:13	Front door latch switch (passenger’s side) circuit malfunction	• Open circuit in front door latch switch (passenger’s side) circuit with the front door (passenger’s side) closed (front door latch switch (passenger’s side) on).	(See DTC B1176:13 [BCM].)
B1178:11	4SD • Trunk lid latch switch circuit malfunction 5HB • Liftgate latch switch circuit malfunction WAGON • Cargo compartment light switch circuit malfunction	4SD • Short to ground in trunk lid latch switch circuit with the trunk closed (trunk lid latch switch off). 5HB • Short to ground in liftgate latch switch circuit with the liftgate closed (liftgate latch switch off). WAGON • Short to ground in cargo compartment light switch circuit with the liftgate closed (cargo compartment light switch off).	(See DTC B1178:11 [BCM].)
C0051:04	Steering angle sensor malfunction	• Z-signal does not change. • BCM detects that steering angle exceeds the specified value.	(See DTC C0051:04 [BCM].)
C0051:2F	Steering angle signal error	• Errors detected in a combination of signals from each sensor (A, B, C, Z).	(See DTC C0051:2F/C0052:11/C0052:13/C0053:11/C0053:13/C0054:11/C0054:13/C0055:11/C0055:13 [BCM].)
C0052:11	Steering angle sensor A signal input circuit malfunction	• Short to ground in steering angle sensor A signal input circuit.
C0052:13	• Open circuit in steering angle sensor A signal input circuit.
C0053:11	Steering angle sensor B signal input circuit malfunction	• Short to ground in steering angle sensor B signal input circuit.
C0053:13	• Open circuit in steering angle sensor B signal input circuit.
C0054:11	Steering angle sensor C signal input circuit malfunction	• Short to ground in steering angle sensor C signal input circuit.
C0054:13	• Open circuit in steering angle sensor C signal input circuit.
C0055:11	Steering angle sensor Z signal input circuit malfunction	• Short to ground in steering angle sensor Z signal input circuit.
C0055:13	• Open circuit in steering angle sensor Z signal input circuit.
C1126:13	Light switch (TNS) circuit malfunction	• Open circuit in light switch (TNS) circuit with the light switch at TNS position.	(See DTC C1126:13 [BCM].)
C1137:12	TR switch (ATX)/Back-up light switch (MTX) circuit malfunction	ATX • Short to power supply in TR switch circuit with the selector lever not in R position. MTX • Short to power supply in back-up light switch circuit with the shift lever not in R position (back-up light switch off).	(See DTC C1137:12 [BCM].)
P1536:13	Parking brake switch circuit malfunction	• Open circuit in parking brake switch circuit with the parking brake lever applied (parking brake switch on).	(See DTC P1536:13 [BCM].)
U0001:88	CAN system communication error	(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)
U0100:00	Communication error to PCM
U0101:00^*6	Communication error to TCM
U0121:00^*7	Communication error to ABS HU/CM or DSC HU/CM
U0151:00	Communication error to SAS control module
U0214:00^*8	Communication error to keyless control module
U0300:00	BCM configuration setting invalid	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • BCM configuration setting not done correctly.	(See DTC U0300:00 [BCM].)
U0401:68	Signal error from PCM	• Correct data cannot be received from PCM.	(See DTC U0401:68 [BCM].)
U0402:68^*6	Signal error from TCM	• Correct data cannot be received from TCM.	(See DTC U0402:68 [BCM].)
U2100:00	BCM configuration not set	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • BCM configuration setting not done correctly.	(See DTC U2100:00 [BCM].)
U3000:04	BCM internal malfunction	• BCM internal malfunction.	(See DTC U3000:04 [BCM].)
U3003:16	BCM power supply voltage malfunction	• BCM power supply voltage is low.	(See DTC U3003:16 [BCM].)
U3003:17	BCM power supply voltage malfunction	• BCM power supply voltage is high.	(See DTC U3003:17 [BCM].)

DTC No.

Description

Detection condition

Reference

B1C45:12

Autostop switch circuit malfunction

• Short to power supply in wiring harness between windshield wiper motor and BCM.

(See DTC B1C45:12 [BCM].)

B1D35:11

Hazard warning switch circuit malfunction

• Short to ground in hazard warning switch circuit with the hazard warning switch off.

(See DTC B1D35:11 [BCM].)

B1D36:11

Turn switch circuit malfunction

• Short to ground in turn switch LH or RH circuit with the turn switch off.

(See DTC B1D36:11 [BCM].)

B10A5:49^*1

Theft-deterrent siren internal malfunction

• Theft-deterrent siren internal malfunction.

(See DTC B10A5:49 [BCM].)

B10A5:86^*1

Signal error from theft-deterrent siren

• Signal error from theft-deterrent siren.

(See DTC B10A5:86 [BCM].)

B10A5:87^*1

Communication error between theft-deterrent siren and BCM

• Communication error between theft-deterrent siren and BCM.

(See DTC B10A5:87 [BCM].)

B10AD:49^*2

Rain sensor malfunction

• BCM detects the rain sensor internal malfunction continuously for 10 times.

(See DTC B10AD:49 [BCM].)

B10AD:87^*2

Communication error between rain sensor and BCM

• BCM detects the communication missing with the rain sensor continuously for 10 times.

(See DTC B10AD:87 [BCM].)

B10D0:11

Trunk lid opener switch (4SD)/Liftgate opener switch (5HB, WAGON) circuit malfunction

• Short to ground in trunk lid opener switch (4SD)/liftgate opener switch (5HB, WAGON) circuit.

(See DTC B10D0:11 [BCM].)

B1008:11

Windshield wiper switch circuit malfunction

• Short to ground in windshield wiper switch circuit with the windshield wiper switch off.

(See DTC B1008:11 [BCM].)

B1046:11^*3

Front fog light switch circuit malfunction

• Short to ground in front fog light switch circuit with the front fog light switch off.

(See DTC B1046:11 [BCM].)

B1047:11^*4

Rear fog light switch circuit malfunction

• Short to ground in rear fog light switch circuit with the rear fog light switch off.

(See DTC B1047:11 [BCM].)

B1048:11

Brake fluid level sensor circuit malfunction

• Short to ground in brake fluid level sensor circuit with the brake fluid amount below the lower side of the minimum.

(See DTC B1048:11 [BCM].)

B1051:11

Windshield washer switch circuit malfunction

• Short to ground in windshield washer switch circuit with the windshield washer switch off.

(See DTC B1051:11 [BCM].)

B1052:11

Rear washer switch circuit malfunction

• Short to ground in rear washer switch circuit with the rear washer switch off.

(See DTC B1052:11 [BCM].)

B1079:13^*5

Bonnet latch switch circuit malfunction

• Open circuit in bonnet latch switch circuit with the bonnet closed (bonnet latch switch on).

(See DTC B1079:13 [BCM].)

B109F:49^*1

Intruder sensor internal malfunction

• Intruder sensor internal malfunction.

(See DTC B109F:49 [BCM].)

B109F:86^*1

Signal error from intruder sensor

• Signal error from intruder sensor.

(See DTC B109F:86 [BCM].)

B109F:87^*1

Communication error between intruder sensor and BCM

• Communication error between intruder sensor and BCM.

(See DTC B109F:87 [BCM].)

B11C0:13

Rear door latch switch (driver’s side) circuit malfunction

• Open circuit in rear door latch switch (driver’s side) circuit with the rear door (driver’s side) closed (rear door latch switch (driver’s side) on).

(See DTC B11C0:13 [BCM].)

B11C1:13

Rear door latch switch (passenger’s side) circuit malfunction

• Open circuit in rear door latch switch (passenger’s side) circuit with the rear door (passenger’s side) closed (rear door latch (passenger’s side) switch on).

(See DTC B11C1:13 [BCM].)

B11DA:11

Front door key cylinder switch (driver’s side) circuit malfunction

• Short to ground in front door key cylinder switch (driver’s side) circuit with the front door key cylinder switch (driver’s side) off.

(See DTC B11DA:11 [BCM].)

B11DC:11

Rear wiper switch circuit malfunction

• Short to ground in rear wiper switch circuit with the rear wiper switch off.

(See DTC B11DC:11 [BCM].)

B1130:11

Light switch circuit malfunction

• Short to ground in light switch circuit with the light switch off.

(See DTC B1130:11 [BCM].)

B1172:11

Door lock-link switch (driver’s side) lock-side circuit malfunction

• Short to ground in door lock-link switch (driver’s side) lock-side circuit with the door lock-link switch (driver’s side) unlocked.

(See DTC B1172:11 [BCM].)

B1172:13

Door lock-link switch (driver’s side) unlock-side circuit malfunction

• Open circuit in door lock-link switch (driver’s side) unlock-side circuit with the door lock-link switch (driver’s side) unlocked.

(See DTC B1172:13 [BCM].)

B1174:13

Door lock-link switch circuit malfunction

• Open circuit in door lock-link switch circuit with the door lock-link switch unlocked.

(See DTC B1174:13 [BCM].)

B1175:13

Front door latch switch (driver’s side) circuit malfunction

• Open circuit in front door latch switch (driver’s side) circuit with the front door (driver’s side) closed (front door latch switch (driver’s side) on).

(See DTC B1175:13 [BCM].)

B1176:13

Front door latch switch (passenger’s side) circuit malfunction

• Open circuit in front door latch switch (passenger’s side) circuit with the front door (passenger’s side) closed (front door latch switch (passenger’s side) on).

(See DTC B1176:13 [BCM].)

B1178:11

4SD

• Trunk lid latch switch circuit malfunction

5HB

• Liftgate latch switch circuit malfunction

WAGON

• Cargo compartment light switch circuit malfunction

4SD

• Short to ground in trunk lid latch switch circuit with the trunk closed (trunk lid latch switch off).

5HB

• Short to ground in liftgate latch switch circuit with the liftgate closed (liftgate latch switch off).

WAGON

• Short to ground in cargo compartment light switch circuit with the liftgate closed (cargo compartment light switch off).

(See DTC B1178:11 [BCM].)

C0051:04

Steering angle sensor malfunction

• Z-signal does not change.

• BCM detects that steering angle exceeds the specified value.

(See DTC C0051:04 [BCM].)

C0051:2F

Steering angle signal error

• Errors detected in a combination of signals from each sensor (A, B, C, Z).

(See DTC C0051:2F/C0052:11/C0052:13/C0053:11/C0053:13/C0054:11/C0054:13/C0055:11/C0055:13 [BCM].)

C0052:11

Steering angle sensor A signal input circuit malfunction

• Short to ground in steering angle sensor A signal input circuit.

C0052:13

• Open circuit in steering angle sensor A signal input circuit.

C0053:11

Steering angle sensor B signal input circuit malfunction

• Short to ground in steering angle sensor B signal input circuit.

C0053:13

• Open circuit in steering angle sensor B signal input circuit.

C0054:11

Steering angle sensor C signal input circuit malfunction

• Short to ground in steering angle sensor C signal input circuit.

C0054:13

• Open circuit in steering angle sensor C signal input circuit.

C0055:11

Steering angle sensor Z signal input circuit malfunction

• Short to ground in steering angle sensor Z signal input circuit.

C0055:13

• Open circuit in steering angle sensor Z signal input circuit.

C1126:13

Light switch (TNS) circuit malfunction

• Open circuit in light switch (TNS) circuit with the light switch at TNS position.

(See DTC C1126:13 [BCM].)

C1137:12

TR switch (ATX)/Back-up light switch (MTX) circuit malfunction

ATX

• Short to power supply in TR switch circuit with the selector lever not in R position.

MTX

• Short to power supply in back-up light switch circuit with the shift lever not in R position (back-up light switch off).

(See DTC C1137:12 [BCM].)

P1536:13

Parking brake switch circuit malfunction

• Open circuit in parking brake switch circuit with the parking brake lever applied (parking brake switch on).

(See DTC P1536:13 [BCM].)

U0001:88

CAN system communication error

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR 2.0 DISI))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 2.0 DISI))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)

U0100:00

Communication error to PCM

U0101:00^*6

Communication error to TCM

U0121:00^*7

Communication error to ABS HU/CM or DSC HU/CM

U0151:00

Communication error to SAS control module

U0214:00^*8

Communication error to keyless control module

U0300:00

BCM configuration setting invalid

Warning

• Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

• BCM configuration setting not done correctly.

(See DTC U0300:00 [BCM].)

U0401:68

Signal error from PCM

• Correct data cannot be received from PCM.

(See DTC U0401:68 [BCM].)

U0402:68^*6

Signal error from TCM

• Correct data cannot be received from TCM.

(See DTC U0402:68 [BCM].)

U2100:00

BCM configuration not set