AIR MIX ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

id0740a1802400

L.H.D.

Driver-side

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2. Disconnect the air mix actuator connector.

3. Remove the hook (1), remove the rod (2) from the air mix actuator link.

am3uuw00004884

4. Remove the screw.

am3zzw00011016

5. Remove the driver-side air mix actuator.

6. Install in the reverse order of removal.

Passenger-side

2. Remove the following parts:

(1) Front scuff plate (Passenger-side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2) Front side trim (Passenger-side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(4) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(5) Lower panel (Passenger-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

(6) Shower duct (Passenger-side) (See A/C UNIT REMOVAL/INSTALLATION.)

3. Disconnect the air mix actuator connector.

4. Remove the screw.

am3uuw00004045

5. Remove the Passenger-side air mix actuator.

6. Install in the reverse order of removal.

R.H.D.

Driver-side

1. Set the air intake mode to FRESH.

2. Set the air mix mode to MAX COLD.

3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

4. Remove the following parts:

(1) Front doors (See FRONT DOOR REMOVAL/INSTALLATION.)

(2) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(3) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(4) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(5) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(6) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)

(7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(8) Selector lever knob (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)

(9) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(10) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(11) Console (See CONSOLE REMOVAL/INSTALLATION.)

(12) Shift lever component (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(13) Selector lever component (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)

(14) Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(15) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(16) Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(17) Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

(18) Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(19) Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

(20) Joint cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

(21) Steering shaft (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

(22) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(23) Center lower panel (Vehicles without audio unit) (See CENTER LOWER PANEL REMOVAL/INSTALLATION.)

(24) Audio unit (Vehicles with audio unit) (See AUDIO UNIT REMOVAL/INSTALLATION.)

(25) Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)

(26) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(27) Center cover (See CENTER COVER REMOVAL/INSTALLATION.)

(28) Dashboard upper panel (See DASHBOARD UPPER PANEL REMOVAL/INSTALLATION.)

(29) Hole cover (See HOLE COVER REMOVAL/INSTALLATION.)

(30) Information display (See INFORMATION DISPLAY REMOVAL/INSTALLATION.) (See MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION.)

(31) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(32) Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

(33) Front fender molding (See COWL GRILLE REMOVAL/INSTALLATION.)

(34) Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)

(35) Windshield wiper motor (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.)

(36) Rear heat duct (1) (See REAR HEAT DUCT REMOVAL/INSTALLATION.)

(37) Shower ducts (See A/C UNIT REMOVAL/INSTALLATION.)

(38) Heater case (See A/C UNIT REMOVAL/INSTALLATION.)

5. Disconnect the following connectors:

― Blower motor connector

― Power MOS FET connector

― Evaporator temperature sensor connector

― Air intake actuator connector

― Air mix actuator connector

― Airflow mode actuator connector

6. Remove the nuts and bolts for installing the dashboard to the body.

7. Remove the nuts for installing the A/C unit to the dashboard.

8. Remove the dashboard. (See DASHBOARD REMOVAL/INSTALLATION.)

9. Remove the screw.

am3zzw00011017

10. Remove the driver-side air mix actuator.

11. Install in the reverse order of removal.

Passenger-side

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2. Remove the following parts:

(1) Front scuff plate (Passenger-side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2) Front side trim (Passenger-side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(4) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(5) Lower panel (Passenger-side) (See LOWER PANEL REMOVAL/INSTALLATION.)

(6) Shower duct (Passenger-side) (See A/C UNIT REMOVAL/INSTALLATION.)

3. Disconnect the air mix actuator connector.

4. Remove the hook (1), remove the rod (2) from the air mix actuator link.

am3uuw00004884

5. Remove the screw.

am3zzw00011018

6. Remove the Passenger-side air mix actuator.

7. Install in the reverse order of removal.